2011 reg cab sierra with l92 engine

Hi all
i just swaped my 2011 sierra engine with l92 escalade engine . i really need the stock tune for the 6.2 so i can put it
in my diablo and upload it to my truck .Can anybody help me please .

[mikel]

what was it, a 5.3?

yeah 5.3 flex fuel took every thing from the escalade and put it in my truck it runs fine with no codes , only i want a stock escalade flex fuel tune so i can drive the car till i custom tune it .diablo custom tune is the best tune ever had in my life

[06MonteSS]

so it was a 5.3... and you put a 6.2L engine in it.. but still using the original ecm/tcm that was for the 5.3 engine.. .

is the new 6.2L engine also from a 2011???

and you have installed one of the preset canned diablosport tunes to it, and that 6.2L engine is running fine on that????

can you drive the truck now with the preset canned diablosport tune installed in it??

6.2 is i think late 2010 . i didnt tune the truck with predator only i disable DOD and adjust injector slope because it was lean by 5% in stock tune . and it runs fine .

[06MonteSS]

ok...

I'll hook you up with a custom tune.. you can contact me directly.. here's my site www.diablewtune.com

i will custom tune it after i get the exhaust ,headers , cam and intake now i just wanna drive the car safely . if you can send me a stock l92 tune i will be very thankfull .

can any one help me ??

[mikel]

well, what you are asking for is a custom tune....if you plan to wait, thats the best plan.

mikel only i need a stock 2011 6.2 escalade tune just untill i add all the parts to my car .

[06MonteSS]

and to do that, to put a "stock" 6.2L tune on your tool for your 5.3L ecm, requires custom tuning for it... so if it's running fine now, then leave it...

add your parts, and go get your custom tune done all at once....